Heating and cooling represent around half of the EU’s final energy use, according to the European Environment Agency, making local action essential to Europe’s energy transition. On 28 October, the Plan4Cold webinar, co-organised with ManagEnergy, brought together experts and practitioners to discuss how municipalities can prepare for mandatory local heating and cooling plans, showcasing practical tools, real-world examples, and the vital support of Energy Agencies. Four FEDARENE members took the floor: the Castilla y León Regional Energy Agency (EREN), the Madeira Regional Agency for Energy and Environment (AREAM), Dublin’s Energy Agency (Codema) and the Plovdiv Energy Agency (EAP). 

A new planning duty on the horizon 

Ricardo González Mantero, from Castilla y León Regional Energy Agency, placed Heating ang Cooling in the EU policy context, following a line that runs from the 2016 Heating and Cooling Strategy to this year’s Electrification Action Plan. He summed it up in three words: renovate, electrify, decarbonise. Now, the recast Energy Efficiency Directive adds a concrete duty. Once it is transposed nationally, municipalities above 45 000 inhabitants must prepare and implement local heating and cooling plans. Commission guidance is expected in 2027. Municipalities therefore have time to prepare, but should start as soon as possible to best anticipate future requirements.  

Many municipalities have the ambition but not the means 

Plan4Cold, a LIFE-funded project coordinated by the Portuguese Energy Agency (ADENE) and running until September 2027, supports municipalities around this gap in Greece, Italy and Portugal, with follower cities in Croatia and Spain. Rita Pestana, from ADENE, described Southern Europe as a region where heatwaves are turning cooling into an energy security and public health issue. Yet district networks are rare, equipment is old and buildings are inefficient. Above all, many municipalities lack the staff, funding, data and tools to plan. Still, capacity cannot be outsourced: the plan must be owned by the municipality, developed with local stakeholders, and then implemented and monitored. That is why the support of local partners matters as much as the plan itself. 

Energy Agencies: building the missing capacity 

This is where Energy Agencies come in. They build the baseline that municipalities lack and they translate EU requirements into measures that fit local realities and existing plans. The case of Madeira shows what this support looks like in practice. On the island, only Funchal, with about 105 000 inhabitants, must have a local plan, but the Regional Energy Agency AREAM is preparing one for the whole island so that smaller municipalities are not left behind. Its first task was to build the data that did not exist, using statistics, energy certificates and a stakeholder survey, and then to map it. Plan4Cold then provides the structure: a five-phase method set out in a handbook, scenarios to 2050 and a choice of tools, from free options to licensed software, as Davide Quaggiotto, from R2M Solutions, showed. Agencies can also stay on to support implementation and monitoring. They bring public authorities, utilities, industry and citizens to the same table. As Ruben Figueira puts it, AREAM is not the decision maker but supports those who are. That support can decide whether a plan becomes a living strategy or a compliance document. 

Local resources, local solutions 

Four examples showed that solutions start from local resources. In Asturias (Spain), the public company HUNOSA, has turned flooded former coal mines into a source of geothermal district heating. In Dublin (Ireland), Codema, Dublin’s Energy Agency, explained how a planning policy turned data centre waste heat into a free source for a district network. In Vidin (Bulgaria), the Plovdiv Energy Agency (EAP) presented a school renovation put demand reduction first, then added groundwater heat pumps and PV. In Rijeka (Croatia), the municipal company Energo modernised district heating step by step with EU support. The common lessons were to build on what exists, to plan the sequence of investments and to take regulation into account. 

Join Plan4Cold’s replication activities 

Because one of the core goals is to foster broader adoption, Plan4Cold now wants to extend its approach beyond Southern Europe and is seeking relay organisations already active in heating and cooling, with good contacts with municipalities and stakeholders in their country. Bulgaria, France, Hungary, Ireland, Romania and Sweden are priorities, but other countries are welcome. The replication activities consist of three working group sessions over one year. Relay organisations would help send targeted invitations and moderate breakout rooms in the local language, with guidance from the project. To take part, complete the selection survey. 

For more details you can go to the recording and presentations of the webinar through this link.